Stop throwing away hole saws.
We keep them cutting.
Ciklek picks up your hole saws, step bits, spade bits, and reciprocating blades on a standing schedule — sharpens them to spec, QR-tracks every cycle, and returns them before your crews hit the road Monday. You never run dull tooling again.
Most HVAC and plumbing shops cut their hole saw spend by 50–65% within 60 days.
Free audit — no commitment. We come to your shop or yard. Takes 30–60 min.
The real cost of dull tooling — HVAC & plumbing edition
A dull hole saw isn't just slow.
It's money in the trash.
HVAC and plumbing contractors burn thousands per year on tool replacement — most of it avoidable. The audit makes the number visible.
You're throwing away hole saws that could be resharpened
A good bi-metal hole saw costs $15–$40. A carbide-tipped hole saw runs $40–$120. HVAC and plumbing crews burn through 2–5 per week cutting sheet metal, cast iron, and concrete. Most get tossed at the first sign of drag. Resharpening costs $5–$12 and restores full cutting speed. Ciklek picks them up, sharpens them, and returns them labeled and ready.
Dull bits on a job site cost you more than the bit
A dull step bit on HVAC sheet metal doesn't just cut slower — it work-hardens the metal, grabs, and snaps. A dull hole saw on cast iron DWV heats up and ruins both the tool and the cut. Your crew slows, adapts, improvises. That 45 minutes a day is $50–$80 in loaded labor — every day, across every truck.
Sharp tooling on every truck, every Monday
Managed maintenance means a standing sharpening schedule aligned to your crew's work cycle. No one has to remember to drop off tools. No more running to the supply house mid-job. Tools come back sharp, QR-labeled, and tracked so you know exactly how many cycles each bit has left before replacement.
You can't manage what you can't track
Ask your lead tech: how many cycles has that 3-1/8" Milwaukee hole saw been through? Which step bits are safe to put on a new roof penetration job? Without cycle tracking, you're either replacing too early (money out the window) or running past safe limits (liability). Ciklek tracks every tool by QR code — condition reports included with every return.
How much is your operation spending on tool replacement?
Our free audit scans your tool inventory, reviews your last 90 days of supply purchases, and puts a real dollar figure on the problem. Most HVAC and plumbing shops are surprised — in a good way.
Tools we service
Every cutting tool an HVAC or plumbing crew runs
If it cuts sheet metal, cast iron, PVC, concrete, or timber — we track it, service it, and return it sharp.
Bi-Metal Hole Saws
Sheet metal, PVC, drywall — up to 6"
Carbide Hole Saws
Cast iron, tile, concrete
Step Bits
HVAC sheet metal and electrical
Spade Bits
Framing and rough-in plumbing
Auger Bits
Timber frame and structural
Reciprocating Blades
Demo, cast iron, nail-embedded wood
Jigsaw Blades
Sheet metal, thin-wall tubing
Self-Feed Bits
Large-diameter rough-in boring
How it works
Sharp tools.
Zero disruption.
Three steps. Your production never stops. Every tool tracked from pickup to delivery.
We pick up
Schedule a pickup window that fits your production schedule. A Ciklek driver scans every tool's QR code at your shop — circular blades, router bits, planer knives, end mills — and takes them away.
We send to the experts
Your tools ship to our partner service center with a work order specifying the exact geometry for each tool — hook angle, bevel, carbide grade, grind wheel, tolerances. They sharpen to spec and ship back.
We verify and deliver
Every tool is QC-checked against its spec when it returns. Measurements logged. Photos taken. Anything outside tolerance is flagged before it gets back to your shop. Then it's back on your floor, sharp and tracked.
The spec sheet difference
Every tool has a technical contract
Generic sharpening shops grind everything to a standard angle. We maintain a per-tool specification — hook angle, bevel, carbide grade, preferred grind wheel, tolerances — and send it with every batch. Your Freud ATB blade comes back sharpened the same way every single time.
- Hook angle & bevel targets with ±tolerance band
- Carbide grade and coating specifications
- Preferred grind wheel (CBN, diamond, aluminum oxide)
- Plate thickness tracking — retire before it's unsafe
- Maximum resharpening cycles enforced automatically
Run the numbers for your operation
HVAC/plumbing-specific ROI — based on typical contractor tool spend
2-truck crew
4-truck crew
8-truck fleet
Based on average bi-metal hole saw cost of $30 replacing vs $8 resharpening. Actual results vary by tool type and usage.
From the field
HVAC & plumbing shops using Ciklek
"We run 6 HVAC trucks and we were going through a case of hole saws every month — just tossing them when they felt slow. Ciklek changed that. Same saws, back on the trucks every week, sharp. Our supply spend dropped by almost half in 60 days."
Derek V.
Owner, Bay Area HVAC Solutions
"The QR tracking was the thing I didn't know I needed. Now when a tool fails early, I can actually show the manufacturer how many cycles it's had. Filed a warranty claim last month on a carbide hole saw that was underperforming — and won it."
Mike T.
Operations Lead, Pacific Plumbing & Mechanical
Hole saw resharpening — Bay Area
Serving HVAC and plumbing contractors across San Francisco, Oakland, San Jose, the East Bay, Peninsula, and South Bay. Pickup and return included.
Features
Built for the shop floor
Every feature exists because a shop owner told us something was broken.
QR tracking per tool
Every blade, router bit, and planer knife gets a unique QR label. Scan in, scan out. Full chain of custody from your shop to service center and back.
Standing spec sheets
Hook angle, bevel, carbide grade, grind wheel, tolerances — stored per tool. Your Freud ATB comes back the same way every single time.
Multi-shop batch shipping
We consolidate tools from across all your locations into a single service batch. One shipment, one work order, maximum turnaround efficiency.
Work order PDFs
A printed spec sheet ships with every batch. The service center knows exactly what to do with each tool — no calls, no guesswork.
Plate thickness tracking
Each service cycle removes material. We track plate thickness over time and flag tools approaching the minimum safe threshold before they fail.
Retirement & cycle alerts
Max resharpening cycles enforced per model. System alerts you when a tool is due for replacement — before it throws a tip mid-cut.
QC verification on return
Returned tools are checked against their spec before going back to your shop. Actual vs target measurements logged. Photos taken. Nothing skips QC.
Customer portal
See every tool, every service event, every batch status in real time. Download spec sheets, service history, or retirement reports.
Automated invoicing
Invoice generated and emailed after every delivery. Itemized by tool and service type. Pay online. Syncs to QuickBooks.
Discounted tooling supply
Buy replacement blades through Ciklek at volume pricing — typically 10–20% below retail. Pre-registered before arrival.
Blade-as-a-Service
Flat monthly fee covers supply, service, and replacement. We own the inventory. You run production and never touch a purchase order.
Multi-location accounts
Multiple shops, one account. Separate pickup addresses, combined billing. Account managers see everything across all your sites.
Pricing
Pay for what you use.
Nothing else.
No monthly fees. No contracts. No blade limits. You're charged when we pick up and when tools are done — that's it.
Per Pickup
Flat fee every time we come to your shop — regardless of how many tools are in the batch. Covers pickup, transport to our service center, and return delivery.
- Free scheduling via customer portal
- Driver scans every tool on pickup
- QR-tracked from door to door
- Return delivery included
Per Blade Sharpened
Charged per blade once sharpening is complete and QC-verified — before your tools head back. Bring 4 blades or 40; you pay only for what gets serviced.
- Carbide resharpen to original spec
- Before & after condition logged
- Wear level & retirement alerts
- Full service history in your portal
Example job
12 blades
Typical flooring contractor batch
$30 + $180
$30 pickup + 12 × $15
$210 total
vs $1,440 to replace them new
$0
to get started — free audit, free QR labels, free first pickup
No lock-in
book as needed, cancel anytime, no contract required
48–72 hr
standard turnaround, pickup to delivery
Enterprise accounts with high volume? Talk to us about custom rates.
Get started
We track every blade,
handle every service,
and tell you when to retire
before you have a problem.
You just run production.
Serving woodworking, metal fabrication, and plastics shops across the US.