Most shops replace cutting tools when they go dull. We sharpen them for a fraction of the cost — and never let them get dull in the first place. See exactly what you're leaving on the table.
What kind of shop are you running?
Circular saw blades, undercut saw blades, jamb saw blades
Drag to match your shop — numbers update live.
Total individual saw blades your crew uses
What you pay when you buy a new one to replace a worn-out tool
How often each tool gets thrown out and replaced with a new one
Revenue or billable value generated per production hour
Times production stopped to swap out a dull or broken tool
People affected when production goes down
You're currently spending
$9,360/yearjust replacing saw blades
18 saw blades × 8 replacements/year × $65 each
Estimated annual savings with Ciklek
Total recoverable value
$16,758/yr
Ciklek — Pay As You Go
18 pickups/yr · $15/blade
$2.2k/yr
Net gain after Ciklek cost
+$14,598/yr
Pays for itself in ~2 months
Return on investment
+676%
* Estimates based on industry averages for flooring contractor operations. A free on-site audit gives you exact numbers for your shop.
Want the real number?
A Ciklek rep visits your shop, scans every saw blade, and hands you a full report: which are past retirement, which are running dull, and what it's actually costing you. No pitch. Just your numbers.
Book My Free AuditA free Ciklek blade audit turns calculator estimates into real numbers — your tools, your shop, your actual savings. A rep visits, scans your entire inventory, and hands you a full condition report. No charge. No obligation.
Already convinced? See how pricing works →
Every time you buy a new blade or bit to replace a worn-out one, that's replacement cost. The calculator takes your average tool price × how often each tool gets replaced × your fleet size. Most shops are shocked when they see it annualized.
Three reasons: (1) Properly maintained tools last 3–4× longer before retirement, dramatically cutting how often you buy new ones. (2) Sharp tooling produces fewer bad cuts, reducing rework callbacks. (3) Scheduled pickups mean you always have sharp tools on hand — no emergency hardware runs that eat half a day.
The calculator estimates your annual Ciklek cost using pay-as-you-go pricing: $30 per pickup and $15 per blade service. It assumes 6 sharpenings per blade per year and scales pickups with your tool count. Your net savings = total cost reduction − estimated Ciklek cost.
Book a free blade audit. A Ciklek rep visits your shop, physically scans every tool with our QR system, checks edge condition, and builds a full report: which tools are condemned, which are running dull, and your exact annualized waste. No charge, no pressure.